Before Takeoff Checklist

Before Takeoff Checklist Discussion

Prior to this checklist, you would probably have completed other checklists for a final run-up and engine check checklist, and change radio to tower control frequency and call the tower for clearance to takeoff. We may also copy down any last minute tower and departure instructions. We would also perform a last visual check of the control surfaces of the aircraft to ensure they are continuing to function correctly.

The following is a sampling of some of the tasks to perform while on hold short of the runway before being given the "Clear to Takeoff" from the tower. This is a numbered list. Later I intend to change these to check-boxes.

  1. Canopy Close
  2. Check Fuel Pump On
  3. Check Mixture to 100%
  4. Final Flight Instruments Check and Set
  5. Elevator Trim to Neutral
  6. Verify Engine Oil Temp is below 75 degrees Fahrenheit

Once the Clear to Takeoff is given from the tower, you perform a final visual check of the instruments of the aircraft, perform a final visual check that the runway and approaches to the runway are clear of other aircraft and wildlife, and finally taxi onto the active runway and start takeoff procedures. Following the takeoff roll and rotation, we climb the aircraft at the proper climb attitude and airspeed. As we depart the airport control zone we set the radios to the next portion of the flight controllers area and call those flight controllers.